ZeroBloatTools LogoZeroBloatTools
Verified Preset100% Client-Side
Updated 2026-11-15•Instant Calculation

11×14 Print in 16×20 Frame Mat Calculator

Gallery wall proportion planner with 10 3/4" × 13 3/4" window cut, 2 5/8" side borders, and +0.5" optical center offset.

Interactive Pre-Configured Simulator
Picture Frame & Mat Board Studio
Popular:

Plain-English Summary: What to Buy or Cut

No math required • Take these exact measurements to Michaels, IKEA, or your cutting ruler.

1. Outside Board (Fits Frame):
16" × 20"

Cut the outside cardboard to this size. It matches the glass size of your frame.

2. Hole in Middle (Window Cut):
10 3/4" × 13 3/4"

Cut this hole in the center. It hides the photo edge (1/8") so it doesn't fall through.

3. Border Margins to Leave:
Sides: 2 5/8"
Top: 2 7/8" • Bottom: 3 3/8"

+0.5" extra on bottom keeps photo looking centered!

Step 1: Your Photo/Print SizeThe exact size of the physical paper you want to frame
4:5 (Standard 8x10 / 16x20)
Step 2: Your Frame SizeThe inside opening / glass size of the frame
4:5 (Standard 8x10 / 16x20)
Step 3: Wall Balance (Bottom-Weighting)Makes artwork look centered when hung on a wall
Exact Cut Dimensions (Tap to Copy)✓ Proportions Match
Window Opening Hole
10 3/4" × 13 3/4"
Cut hole in center
Outside Board (Glass)
16" × 20"
Exterior mat dimension
Bottom Border
3 3/8"
+0.5" Weighted
Top Border2 7/8"
Left Border2 5/8"
Right Border2 5/8"
Frame:
Mat:
100%
11×14 inchesHole: 10 3/4" × 13 3/4"2 7/8"3 3/8"2 5/8"2 5/8"
Tap to Enlarge & View Cut Lines
Frame Finish: Matte BlackOuter Glass: 16" × 20"

Logan & Fletcher Mat Cutter Setup Guide

When cutting a mat with a 45° bevel cutter, the mat board is always cut from the REVERSE (back) side.

Top Line Offset
2 7/8"
Measure down from top edge
Bottom Line (Weighted)
3 3/8"
Measure up from bottom edge
Left Line (Backside)
2 5/8"
Measure in from back left
Right Line (Backside)
2 5/8"
Measure in from back right
Pro Mat Cutting Technique:
  • Draw pencil cut lines on the REVERSE (back) side of your mat board with a light 2H pencil.
  • Remember: When viewing the back of the board, Left and Right are mirrored.
  • If using a 45° bevel cutter (e.g. Logan 301/450), start cut ~1/16" before the corner pencil line and stop ~1/16" past to ensure clean corner drops without overcuts.
  • Always use a fresh, sharp mat blade (#270) to prevent rough paper edges or core tearing.
Mat Border & Window Cut Dimensions

11×14" Print inside 16×20" Gallery Frame Specifications

Engineered with 1/8" print overlap on all edges inside a standard 16×20" backing/rabbet.

Layout StyleWindow CutSide BordersTop / BottomGallery Application
Equal Borders10 3/4" × 13 3/4"2 5/8" (2.625")3 1/8" / 3 1/8"Architectural grids & multi-frame pairs
Classic Bottom Weight (+0.5")10 3/4" × 13 3/4"2 5/8" (2.625")2 7/8" Top / 3 3/8" BottomSolo exhibition portraits & landscape focal pieces
Double Accent Mat (1/4" Reveal)11 1/4" × 14 1/4" Outer2 3/8" Outer10 3/4" × 13 3/4" Inner WindowAdds subtle depth inside deep wood frames
Archival Framing Geometry

Mat Overlap, Optical Weight & Aspect Proportions

  • A 16×20 frame offers generous 2 5/8" to 3 3/8" breathing room around an 11×14 print, making it one of the strongest museum-style proportions in consumer framing.
  • At 10 3/4" × 13 3/4" opening size, be sure to factor in the 1/4" to 3/8" frame rabbet lip on the outer edge when inspecting final visible margins.
  • 8-ply conservation mat boards dramatically accentuate the 45° bevel cut around larger 11×14 openings compared to standard 4-ply board.
Framing & Mat Cutting Mistakes

Critical Errors to Avoid

Common Error: Cutting the mat window hole to the exact physical dimensions of the artwork (e.g. cutting 8.0" x 10.0" for an 8x10 print).
Best Practice: Always subtract 1/4" total (1/8" per edge). If you cut an exact 8x10 opening, the print has zero mounting border and will slip right through the hole.
Common Error: Assuming mathematically equal borders will look centered when the frame is hung on a wall.
Best Practice: Due to human optical perception, equal borders make the artwork feel like it is falling down. Use optical bottom-weighting (+0.5" to +0.75" on the bottom border) to achieve visual harmony.
Common Error: Trying to force equal borders on all four sides when the print aspect ratio does not match the frame.
Best Practice: An 11x14 print (1:1.27) inside a 16x20 frame (1:1.25) mathematically requires different lateral vs vertical borders (2.5" sides, 3.0" top/bottom). Forcing equal borders would crop the artwork.
Frequently Asked Questions

11×14 Print in 16×20 Frame Mat Size Questions Answered

How wide are the mat borders for an 11x14 picture in a 16x20 frame?

With a 10 3/4" × 13 3/4" window cut, side borders measure 2 5/8" (2.625") and top/bottom borders average 3 1/8" (3.125"). Classic bottom weighting adjusts top to 2 7/8" and bottom to 3 3/8".

Does a 16x20 frame rabbet hide part of the mat border?

Yes—most wood and metal frame mouldings overlap the front perimeter of the glass and mat board by 1/4" on each edge, reducing apparent exposed border slightly while locking the mat flat.

Standard Photo & Frame Size Matching Matrix

4×6" Print
8×10" Frame (2.0" borders)
5×7" Print
8×10" Frame (1.5" sides, 1.5" top/bottom)
8×10" Print
11×14" Frame (1.625" sides, 2.125" top/bottom)
8.5×11" Diploma
11×14" Frame (1.375" sides, 1.625" top/bottom)
11×14" Print
16×20" Frame (2.625" sides, 3.125" top/bottom)
12×18" Print
18×24" Frame (3.125" sides, 3.125" top/bottom)
16×20" Print
20×24" Frame (2.125" sides, 2.125" top/bottom)
A4 Print
30×40 cm IKEA Frame (48mm sides, 54.5mm top/bottom)
Archival Framing Notice

Mat Cutting & Artwork Preservation Safety Standards

Use 100% Acid-Free (Alpha-Cellulose or Cotton Rag) Mat Board: Never use standard wood-pulp cardboard for framing valuable art or family photos. Lignin in non-archival boards off-gases acid over time, producing permanent brown burn lines on your artwork.
T-Hinge with Archival Linen Tape: Never tape all four edges of an artwork down solid. Paper naturally expands and contracts with changes in ambient humidity. Hang the print from the top edge only using archival T-hinges to prevent paper buckling or rippling.
Change Mat Cutter Blades Frequently: A dull 45° bevel blade tears the paper core and creates ragged, fuzzy edges. Replace blades every 5 to 10 cuts for clean, laser-sharp bevel drops.